Unique Cars

Price Range
Recently Listed
Seller Location
Radius (km)

Listing Type:

Category
Year
-
Mileage (m)
-
Mileage (km)
-
Colour
RHD/LHD
Gearbox type
Auction
Find Dealers
Seller Location
Radius (km)
Dealer Name or Keywords

Austin-Healey 100 Classic Cars (Uk) For Sale

Trade Safely. Use our anti-scam guide to protect yourself.

21 result(s)
Sort by

show

results

  • RefCode: TA1127132
  • Make: AUSTIN-HEALEY
  • Model: 100
  • Category: Convertible
  • Year: 1,957
  • Mileage (Miles): 600
  • Mileage (KM): 965
  • Colour: See Photo/Text
  • RHD/LHD: RHD
  • Gearbox type: N/A
  • Currency: GBP

Vintage and Prestige are proud to offer this 1957 Austin Healey 100/6 For Sale. Austin Healey 100/6 Year: 1957 Chassis no: BN4-S/42181 Engine no: IC/42181 Registration: NFY 604 An immaculate matching numbers 1957 Austin Healey 100/6. Has had a body off nut and bolt restoration done to concours standard. Done approximately 600 miles since restoration. Engine completely rebuilt including high capacity oil pump. It also has a spin off oil filter fitted, however the original comes with the car. Gearbox and diff completely checked over. Suspension all new including re-bushed. New wiring loom New full carpet set Since restoration after a bedding in period over 20 hours have been spent checking everything over. Oil has been changed. Twin carbs have been tuned and set up with the proper needles by an expert. Timing and steering etc have all set up properly. This is a standard car with the following period extras: Hard top with roof lining and air vent Brand new soft top comes with car (never been on car) Brand new Tonneau cover comes with car (never been on car) 100/S Sports Seats (a lot more comfortable) Front Disc Brakes conversion (normally not on this model) Brand new overdrive (nor normally on this model) Works type grill (looks better and allows more air in) Extra Kenlowe fan (absolutely no overheating problems even in our recent heat wave) Works type Lamp Bracket 2 x Lucas Spot lamps (both wired up with switch in dash) Reversing lamp (with warning light in switch) Alternator conversion Spare coil fitted under bonnet Stainless Steel side exhaust system fitted New Smiths oil pressure gauge fitted.(more accurate reading) Small trip meter fitted Map reading light fitted Works type petrol filler cap Being 1957 this car is Mille Miglia eligible which makes it very desirable This car is as perfect as it gets and is in stunning condition. It has had a meticulous check over to sort all the little issues after a complete restoration and is simply ready to drive and enjoy. A gallery of large high-resolution pictures may be viewed on our website. Office 01375 379719 Richard Biddulph 07967 260673 Christoff Cowens 07772188037 We accept Credit/Debit Cards. Part Exchange welcome. Weekend & evening viewings OK. Viewings by appointment : Prestige House. 9 Globe Industrial Estate, Grays, Essex, RM17 6ST

CALL 01375 379719
  • RefCode: TA1149710
  • Make: AUSTIN-HEALEY
  • Model: 100
  • Derivative: 100/6
  • Category: Convertible
  • Year: 1,956
  • Mileage (Miles): 0
  • Mileage (KM): 0
  • Colour: Blue
  • RHD/LHD: RHD
  • Gearbox type: Manual
  • Currency: GBP

YSU 405 as an early 100/6 was built at the Longbridge factory on 29th December 1956 as a European specification car for delivery to Dusseldorf, Germany. All Longbridge built cars featured a beautiful ridged bonnet, lost on later cars due to cost implications.

CALL 01420 408124
  • RefCode: TA1093979
  • Make: AUSTIN-HEALEY
  • Model: 100
  • Category: Convertible
  • Year: 1,958
  • Mileage (Miles): 800
  • Mileage (KM): 1,287
  • Colour: See Photo/Text
  • RHD/LHD: LHD
  • Gearbox type: N/A
  • Currency: GBP

Vintage and Prestige are proud to offer this LHD 1958 Austin Healey 100/6 For Sale. The BN6 was the final development of the Healey 100/6 two-seater roadster before being replaced by the Healey 3000 (BT7) in 1959. Chassis no BN6-L/3516 was built at MG's Abingdon works between the 30th September and 2nd October 1958 and shipped to a dealer in San Francisco on the 13th of October. After 32 years of enjoying life in the States and with 54,000 miles on the odometer, this 'Big Healey' crossed the Atlantic once again and joined the collection of a Channel Islands resident who is a long-term Healey enthusiast. He decided to carry out a 'nut and bolt' restoration with great attention to detail hoping to achieve a Concours winning standard. The six-port, cylinder head has been reconditioned and converted to unleaded compatibility with new valves, valve seats, seals etc. The block was cleaned inside and out, re-bored to +0.020 and fitted with new pistons and rings and top end bearings. The crank shaft was within 0.0005 of original so polished only and refitted with new bearings, thrust washers, big end bolts and main bearing nuts. The timing chain and tensioner have been replaced and the water pump reconditioned. All oil and waterways in the block and cylinder head were cleaned and the core plugs renewed. The rear axle and differential were dismantled, cleaned and assembled using new parts where required, and the clutch and gearbox were fully reconditioned using new parts. The steering and braking systems have been completely overhauled and new tyres fitted. All electrical components have either been overhauled or replaced with new items including a complete new braided wiring harness. A new aluminium fuel tank has been fitted along with new fuel lines and fuel pump and the carburettors have been fully reconditioned and set up appropriately. A complete, stainless steel, exhaust system and brackets were fitted. Whenever possible, the original exterior trim has been re-chromed to a very high standard with new brightwork added only when necessary. The hood and tonneau cover are new, the side screens have been reconditioned, and the windscreen glass is new. The interior was completely retrimmed to an extremely high standard and features Navy Blue leather upholstery with white piping and well-fitted carpets in Navy Blue Finally, after weeks of preparation, the Healey was carefully repainted in period Ice Blue over Old English White and the tight shut lines and depth of finish will reward any inspection. This Austin Healey is as immaculate underneath as it is on top. Since this extensive restoration to Concours standard, the car has been driven approximately 200 miles in the Jersey sunshine and any little rattles or niggles eradicated. This Austin Healey comes to us in immaculate Concours condition and is in our showroom ready for viewing. A gallery of large high-resolution pictures may be viewed at http://www.vandp.net Office 01375 379 719 Richard Biddulph 07967 260 673 We accept credit/debit cards. Part exchange welcome. Weekend & evening viewings welcome. Viewings by appointment please. Prestige House. 9 Globe Industrial Estate, Grays, Essex, RM17 6S

CALL 01375 379719
  • RefCode: TA1154975
  • Make: AUSTIN-HEALEY
  • Model: 100
  • Derivative: 6
  • Category: Convertible
  • Year: 1,957
  • Mileage (Miles): 0
  • Mileage (KM): 0
  • Colour: Blue
  • RHD/LHD: RHD
  • Gearbox type: Manual
  • Currency: GBP
  • Auction: 11th July 2019 - DVCA Auctions - Summer Auction

Subject of a meticulous restoration with upgrades... 1957 Austin-Healey 100/6 Modified Registration Number: 746 YUF Chassis Number: BN4-L-0/35805 Engine Number: IC/35805 Transmission: Manual with Overdrive Steering: Right Hand Drive MOT Test Expiry: Exempt Guide Price: £45000 - 55000 Road Tax Exempt Modifications from Standard: Date of Build: 27th February 1957. The car has been tastefully modified to retain the essential character of this early Longbridge produced car whilst improving the performance and reliability of the car. Engine modifications 29D Healey 3000 (BT7) engine has been rebuilt to higher than BJ8 specification by Slark Race Engineering Compression ratio lowered to 9.0:1, hardened valve seats and bronze valve guides fitted to allow the use of unleaded fuel without additives. Head ported and gas flowed throughout. Mildly ported inlet manifold matched to HD8 SU carburettors rebuilt by Burlen Fuel Systems. The Carbs are modified to incorporate a choke linkage (with rose joints) to facilitate a single choke cable operating both jets. K&N air filters are fitted. Throttle linkage replaced by cable. DWR1 Denis Welch fast road cam fitted giving 268 degrees of duration (24, 64, 59, 29) Denis Welch 6-branch tubular exhaust manifold with 2 exhaust system to the rear exit. The branch manifold is fitted with threaded bosses to accept Lambda O2 sensors and is then Zircotec coated to reduce under bonnet temperatures. The silencer is fitted with a Nimbus GII aluminium heat shield. Flywheel lightened and drilled to accept a diaphragm (BJ8) clutch pressure plate. All crankshaft rotating parts fully balanced as an assembly. Connecting rods and pistons balanced and matched. Alloy rocker box cover from Wolseley 6/110 (as fitted to Works cars) fitted. It is modified with a Monza miniature oil filler cap. O ring groove milled into the gasket face to accept 6mm rubber O ring instead of cork gasket. Distributor rebuilt at the Distributor Doctor and advance curve characteristics adjusted to suit the revised camshaft and compression ratio characteristics. Denis Welch High Capacity rotor type oil pump fitted and spin-on oil filter kit. Alloy finned sump. Crankshaft rear oil seal conversion. Engine Bay - General 55Amp Alternator conversion. Earthing straps bridging the engine mounts from crankcase to engine mount towers on both sides to minimise voltage drop. Individual alloy pot reservoirs are fitted feeding the Brake and Clutch master cylinders using stainless braided feed lines. The standard radiator is uprated with a modern high performance core for improved cooling capacity. Correct sleeved thermostat (86deg.C) fitted to give correct circulation when hot. The engine bay firewall is covered in engine-turned stainless steel sheet for improved appearance and to cover all redundant holes and captive nuts without damage to the original shell. (See Electrical) A full-flow Malpassi glass bowl fuel filter/regulator is installed. The regulator element has been removed to allow full flow. The electronic SU pump can be relied on to deliver the correct flow and pressure for carburettors. Nimbus GII aluminium heat shielding is used to protect the cockpit from engine bay heat, and is also applied to both sides of the carburettor heat shield to reduce heat soak from the exhaust manifold. Steering and Front Suspension Uprated anti-roll bar and links fitted with polyurethane bushes. Needle roller thrust (Torrington) bearings to the kingpin trunnions which lighten the steering considerably. Sliding top mounts for Camber adjustment. Set to provide 1 degree negative camber. Denis Welch constant clearance worm fitted to the steering box. Rear Suspension The rear springs are new replacements. They were completely stripped and rebuilt. The tips of the leaves are radiused and chamfered with Teflon interleaving inserted and an extra leaf added. This provides a very supple suspension movement removing the stiction often experienced with leaf springs. Standard Armstrong lever shock absorbers are fitted. The mounting holes have been accurately resized/reamed to accept the special dowel bolts used for mounting. The bolt heads have custom flanges to increase the clamping area and prevent rotation. This allows single handed tightening. The panhard rod is fitted with polyurethane bushes. Wheels & Tyres 15 x 5 Chrome 72 spoke wheels fitted with 180HR15 Michelin XAS tyres. These taller profile tyres give the same rolling diameter as the Dunlop RoadSpeeed tyres that were originally fitted. This maintains the appearance of the wheel within the wheel arch, as Gerry Coker intended, without giving excessive width to the tyre which can cause fouling on the inner rear wings or front splash guards when on full lock. Brakes BT7 disc brakes fitted with M16 (2) calipers. The increased line pressure required for the disc brakes would result in bias to the rear if the standard cylinders are retained. The rear brake slave cylinders were therefore replaced with ¾ inch to correct the brake balance as in the BT7/BJ8 specification. Cunifer brake line tubing used throughout to avoid the known issues with copper tube fatigue failures. Goodridge Stainless braided flexible brake lines fitted. Brake line to the rear is routed through the cockpit (not the alongside chassis rails) for protection. The handbrake pawl has been recreated to reverse the locking function thereby converting to fly-off operation. Pedal Box The brake and clutch pedals have been modified to accept rose joints, bolted in double shear, in place of the standard steel clevis and pin. This removes the unavoidable lost motion from the standard set up. A physical stop has been created to set the upper limit of the return of the pedals. All Big Healeys have a driving position that requires a long reach to the pedals forcing and a very close steering wheel. The pedal upper stop brings the pedals closer allowing the seat to be moved rearward easing the cramped steering relationship. The upper stop removes the dependency on the master cylinder circlip as the limit stop. Threaded pushrods allow the pedal slack, or free play to be minimised giving a very immediate response to pedal inputs. A pedal actuated proximity switch is used for the brake lights omitting the hydraulic switch normally used and known for being insensitive and late to operate. Clutch Stainless Steel hydraulic flexible line fitted for longevity. Diaphragm pressure plate and 9½ friction plate as fitted to MkIII BJ8 Gearbox The original BN4 gearbox with 28% overdrive is retained which has been fully rebuilt at Hardy Engineering (Leatherhead). A gearbox retaining strut would normally hold the rear of the overdrive back to the gearbox cross member to prevent the engine/gearbox assembly from moving forward under braking. Experience has shown that this tension tends to open the flange seals of the overdrive casing resulting in oil leaks. To avoid this possibility compression struts have been installed between the engine backplate and the front engine mount towers to control engine movement. Transmission The original rebuilt propeller shaft mates the gearbox with the original back axle. The axle has been fully rebuilt with new bearings and a replacement crown wheel and pinion set from Mike Lempert is installed giving the coveted 3.54:1 ratio (11:39). The rear oil seal journals at the hubs have been fitted with Speedi-Sleeve journal recovery and are completely oil-tight. Fuel System Solid State electronic SU fuel pump fitted. Copper fuel lines routed through the cockpit (rather than along the chassis rails). Float chamber lids are exchanged, front with rear, to allow a combined banjo fitting to be created eliminating the flexi-pipe link and pipe clips normally used. This also has the benefit of giving improved access to the K&N filter mounting bolts. The carbs are mounted to the inlet manifold using ARP 12-point aero nuts. These use a 3/8 AF ring spanner rather than the customary ½ AF spanner needed for the standard nuts. Space is quite restricted on the carb bodies and this improves access and maintenance convenience. Fuel tank is vented from the left front corner to the filler tube to avoid pressure blow off of fuel in warm weather when the tank is close to full. The filler is a Monza quick release cap and the mounting has been fully integrated into the rear shroud. Electrical All wiring is custom built to modern standards using current materials. It is discretely routed and contained under the scuttle rather than on the engine bay firewall. The rear harness from the boot supports an additional switch-activated courtesy light for the load area. The harness routes through the cockpit of the car along the inner face of the left hand sill. The Battery (negative earth) is carried in the normal tray location and is connected to earth through an FIA approved isolator switch on a custom mounting panel. The panel also carries a DIN power outlet with in-line 15amp fuse. The main Red battery cable is 35mm2 (451/0.3 strand) highly flexible copper welding cable to minimise voltage drop to the starter motor. It is routed along the inner face of the right hand sill. It connects to the solenoid which is mounted on the air plenum box to the right of the steering column inside the cockpit. This location was chosen for ease of access and discrete connection into the wiring looms. From there further red welding cable is routed to the starter motor. Courtesy lights to the footwells, using MGB number plate lights, are fitted to the air plenum box and activated by door earth switches on the A posts which are contacted by the arms of the door holding friction straps. The Power Centre comprises relays and fuses for all major circuits removing electrical load from switches. A main power relay is activated by the ignition switch with further relays for overdrive, indicators, horns, main beam, dipped beam and long range lights. 15 fuses are fitted. 5 are permanently live and 10 are switched through the power relay. The Power Centre is mounted to a hinged panel which is concealed in the footwell cavity that would accommodate the pedal assembly on a LHD car. Rear indicators are built into the standard rear reflector units to avoid the three-function use of the brake/sidelights. Front sidelights are fitted into the P700 Tripod headlamp reflectors leaving the separate front sidelights to function as indicators only. An audible beeper is wired to the indicator warning light as the selector switch occasionally fails to self-cancel. They all do that. Bodywork General All original panels have been retained and repaired. The chassis and body fitting was carried out by Kevin Laws team at Orchard Restorations, who did an excellent job. The car is finished in BMW AtlantisBlau (Atlantic Blue) Code 207. The shell was then fully assembled by Kevin with the exception of the front wings which were loosely mounted for delivery. Sound deadening and adhesive pads are fitted to doors and inside the front wings to reduce panel resonance. This gives a very solid feel to the build of the car. All the usual moisture traps have been cleaned and coated annually with Dinitrol. Bodywork Styling Minor modifications to the styling were carried out for aesthetics or improved practicality. The cockpit styling has been modified to resemble that of the earlier Austin Healey 100. The dash panel is finished in body colour paint with a silver binnacle area rather than vinyl covering. The paint line where the silver joins the blue uses the standard 100/6 embellisher chrome ring to mask the join line. The top of the scuttle is exposed body colour with colour matched demister masks. The padded top covering is not fitted. An alloy front trim rail is fitted to continue the line of the cockpit rails along the doors and around the rear shroud as in the AH100. A modern Cape International heater is fitted obviating the requirement for a slider control. Unusually for a Healey, the cockpit insulation is now so good that in cooler weather the heater is a valuable contribution and delivers well. The standard Bakelite central switch console has been replaced with a chrome plated steel version that carries independent fresh air controls to each of the footwells, heater switch, long range light switch and the choke control. A gas strut is fitted to the boot lid removing the requirement for a prop rod or safety cable. Similarly a matched pair of gas struts are fitted to the bonnet. This removes the need for a bonnet stay rod and avoids the difficult process of stowing the rod with one hand when closing the bonnet. The standard wire spoke banjo steering wheel has been converted and rebuilt with a Nardi style wood rim at 15 diameter by Mike Lempert in the USA, who also supplied the matching gear knob. The equal spacing of the spokes, as Gerry Coker intended, with the vertical spoke between the instruments, is a key feature of these cars, and a wood rim wheel is a period correct upgrade that suits their sporting character. Weather Equipment For economy of production costs the original tonneau covers for these cars were based on the standard fabric width of 54. This practice continues today in the replicas that are available from the usual suppliers. The limited fabric width results in the covers barely reaching over the top of the doors when fitted and closed. The tonneau on 746 YUF is custom made, in matching silver grey, with additional 3 wings on each side to overcome this issue. It prevents rain water from rolling off the cover into the cockpit. Original Longbridge BN4 side curtains have been located and restored to the original specification. These are a multi-piece design and not many sets were made before they were considerably simplified for the BT7 cars. Similarly the Longbridge BN4 hood is unique in its design having a rear section that slopes forward more than the taller, later hoods. That shape and hood frame has been retained on this car as it is one of the significant features of the early sixes. The hood frame however is usually held captive at the feet by sliding mounts. It is a neat idea but difficult to use when deploying as well as being awkward when stowing away. It all too easy to scrape paint and scratch the cockpit rails when fighting with it. The frame has been modified to a socket mounting similar to the BT7 Roadsters which allows for much easier deployment and stowage. The rear backrest, behind which the hood and frame are stowed, is often a poor fit. The shape of the curve and the angle between the top shelf and the backrest frame are critical elements. Getting the fit correct is a complex trial and error process that is often overlooked as every car is marginally different. The vendor spent a great deal of effort getting this fit exactly right as, once the eye is aware of the issue, getting it wrong is all too common and disappointing. This feature however is completely hidden when the tonneau is fitted. Interior Trim Leather and Vinyl in Silver Grey with blue piping were chosen for the interior trim which was carried out by Ahead4Healeys. The interior has been refurbished as closely to the original early BN4 standards as possible, maintaining many of the features which only applied to the earliest 6-cylinder cars. Research with marque experts in the UK and USA identified the correct shaping and construction of the rear three-quarter panels which are unique to the Longbridge model. Also the central wrap over armrest with the distinctive front S curve was not previously available as the dimensions and shape had not been properly captured. The patterns are available to AH4H for future supply of these pieces. Tuning Tuning of SU carburettors are restricted to the adjustment of the fuel/air mixture at idle and balancing the throttles to ensure even load across all cylinders. This is sufficient with a standard engine and known spring and needle requirements. With the non-standard state of tune of the engine in this car, obtaining the correct fuel/air mixture at all throttle positions would necessitate either a lot of rolling road diagnostics or a lot of trial and error with needle profiles. An Innovate Wideband Lambda kit is fitted, that allows mixture data to be logged to a laptop whilst also displaying the mixture strength on a 2 gauge. The gauge can be disconnected and the sensor will continue to operate normally. Using this equipment the vendor has been able to select/adjust needles that give a good mixture at idle but with slight richness throughout the rev range. It is a safe condition that ensures there is no weakness of mixture at Wide open throttle which could unknowingly cause damage to piston crowns. The car returns a consistent 22mpg which could possibly be improved slightly if the needles were more closely adjusted in mid-range to a more lean position. Auction Date: 11 July 2019 - Please visit our website for full information...

CALL +44(0)1963 363353
  • RefCode: TA1149704
  • Make: AUSTIN-HEALEY
  • Model: 100
  • Derivative: 100/6
  • Category: Convertible
  • Mileage (Miles): 0
  • Mileage (KM): 0
  • Colour: White
  • RHD/LHD: RHD
  • Gearbox type: Manual
  • Currency: GBP

Having been In the same ownership for 30 years, the car was given a full restoration finishing in 1998, some 10 years after the vendor first acquired the car. Restoration included a full strip of the car to a bare tub with all mechanicals overhauled and new paint after repairs to the body. These comprehensive works were completed by specialist Precision Sportscar Services of Ontario, Canada.

CALL 01420 408124
  • RefCode: TA1154835
  • Make: AUSTIN-HEALEY
  • Model: 100
  • Derivative: 100/6 BN4
  • Category: Convertible
  • Year: 1,958
  • Mileage (Miles): 419
  • Mileage (KM): 674
  • Colour: See Photo/Text
  • RHD/LHD: LHD
  • Gearbox type: Manual
  • Currency: GBP
  • Auction: 18th May 2019 - Historics - Mercedes Benz World May 2019 Sale

The result of a joint venture, as its name suggests, the Austin Healey was built at Longbridge before moving to the BMC works at Abingdon. It evolved from the timeless 100/4 to accept a bigger six cylinder engine followed by the larger still three litre unit, or 3000. All three incarnations looked superb and drove equally hence their regular use within motorsport. An aluminium model was also produced in very limited numbers and, as result, coveted. The 100/6 could comfortably exceed 100mph, a big deal back then especially at a time when a Ford Popular would struggle to reach 70mph. Zerwick Automotive Engineers are respected specialist in restoration based in Knysna, South Africa. They rebuild, to impeccable standards, a range of classics and ship world-wide. It is this father and son partnership, with over 71 years of experience between them, that we are lucky enough to impart, that are responsible for restoring this example. Initially all paint was removed including box sections and repaintedwith a rust preventative coating before top coats applied. The suspension and rear axle was removed, cleaned and rebuilt; the engine was refitted with new gaskets and seals with the cylinder head overhauled. The interior is completely new throughout including boot liner and all chrome re-chromed. Wiring was repaired with the starter and generator overhauled. A Certificate of Valuation can be found in the history file detailing it to be restored to absolute new factory specifications with an estimated value in 2015 of 620,000 Rand (£32,000). Some non-Healey parts were fitted during the restoration although this was rectified when it arrived in the UK by Austin Healey specialists, Orchard Restorations. Presented here in classic blue over white with, unusually, a hardtop to match, this great drivers car is competitively priced and runs, as you would expect, extremely well indeed.]]

CALL 01753 437 779
  • RefCode: TA1021349
  • Make: AUSTIN-HEALEY
  • Model: 100
  • Derivative: /4 BN2
  • Category: Coupe
  • Year: 1,956
  • Mileage (Miles): 0
  • Mileage (KM): 0
  • Colour: See Photo/Text
  • RHD/LHD: Other
  • Gearbox type: N/A
  • Currency: GBP

Austin Healey 100/4 BN2

CALL 01723 238 167
  • RefCode: TA1149706
  • Make: AUSTIN-HEALEY
  • Model: 100
  • Derivative: 100/6
  • Category: Convertible
  • Year: 1,956
  • Mileage (Miles): 0
  • Mileage (KM): 0
  • Colour: Blue
  • RHD/LHD: RHD
  • Gearbox type: Manual
  • Currency: GBP

Beautiful Healey 100/6 with the desirable creased bonnet and late, more superior roof mechanism. An original UK car, built 23rd December 1956 and delivered to Donald Healey Motor Company, Warwick.

CALL 01420 408124
  • RefCode: TA1149720
  • Make: AUSTIN-HEALEY
  • Model: 100
  • Derivative: 100M Le Mans P280
  • Category: Convertible
  • Year: 1,955
  • Mileage (Miles): 0
  • Mileage (KM): 0
  • Colour: Red
  • RHD/LHD: RHD
  • Gearbox type: Manual
  • Currency: GBP

Photos provided from the original owner, an Austin Dealer show the car before and after conversion at this dealership to 100M specification, with the further addition of aero screens and removal of the bumpers.

CALL 01420 408124
  • RefCode: TA1112451
  • Make: AUSTIN-HEALEY
  • Model: 100
  • Derivative: M
  • Category: Convertible
  • Year: 1,956
  • Mileage (Miles): 0
  • Mileage (KM): 0
  • Colour: See Photo/Text
  • RHD/LHD: LHD
  • Gearbox type: N/A
  • Currency: GBP

Austin Healey 1956 Factory 100M

CALL 01926 321 946
21 result(s)
Sort by

show

results

The information contained within classified listings on TradeUniqueCars.com.au is generated by the private and dealer advertisers. Please confirm listing details including price and specifications directly with the seller.